Blog

Troubleshooting Common Mixer Tap and Basin Mixer Tap Problems

These days, mixer taps are a standard fixture in bathrooms and kitchens because of their elegant design and simple operation. Due to its single-lever design that regulates both temperature and water flow, mixer taps are ideal for kitchen sinks and basins. However, just like any other plumbing equipment, mixer taps may eventually develop problems. Knowing how to solve common problems might save you money and time when calling a plumber. Identifying and fixing the most prevalent problems with mixer and basin taps can be done with this assistance.

1. Leaking Mixer Tap: A common issue is leaking mixer tap, which is frequently the result of worn-out rubber washers or seals. It might be inconvenient and wasteful of water to have this constant leak. To prevent flooding, shut off the water supply before attempting to fix it. After that, unscrew the handle, swap out the damaged washer or seal, and look for any damage to the ceramic disc. If it’s broken, the cartridge could need to be replaced. To make sure the leak has been fixed after replacing everything, put the tap back together and turn the water back on.

2. Low Water Pressure: In the bathroom, where a strong flow is necessary, low water pressure in a bathroom mixer tap can be very annoying. Aerator obstructions or pipe blockages are the usual causes of this problem. Check for debris or limescale by unscrewing the aerator from the spout and fixing the problem. Mineral deposits can be removed by cleaning it with a vinegar and water solution. Examine the pipes for damage or clogs if the issue persists, and if necessary, think about obtaining expert help.

3. Stiff Handle or Difficult Movement: Adjusting the water temperature or flow can be challenging with a stiff mixer tap handle, which is frequently the result of internal sediment buildup or wear and tear. Remove the handle and shut off the water supply to remedy this. For smoother movement, lubricate the internal components with lubricant containing silicone. It could be necessary to replace the cartridge if the handle stays stiff.

4. Water Coming Out at the Wrong Temperature: Even while mixer taps are designed to deliver water at the ideal temperature, there are situations when the settings cause the water to be excessively hot or cold. Uneven water pressure or a broken thermostatic valve could be to blame for this. Verify that the hot and cold supplies are operating correctly in order to remedy it. Modify the valves if there is low pressure in one. The thermostatic valve regulates temperature mixing, so if the problem persists, you could want to replace it.

6. No Water Flow: Your mixer tap may not be producing any water if there are blockages in the pipes or if there is a problem with the cartridge or valve. Make sure the water supply is on and look for any obvious blockages in the spout before attempting to address this. Replacing the damaged cartridge should bring the water flow back.

Conclusion

Despite being made to make daily duties more efficient, mixer taps—whether for the kitchen or bathroom are not impervious to issues. You may keep your bathroom wash basin mixer tap and mixer tap in good operating order by being aware of these typical problems and how to resolve them. You may save time and money by preventing most problems with routine cleaning and the occasional replacement of parts. Still, it’s always a good idea to get professional plumbing assistance if the issue continues or appears to be complicated.

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Check Also
Close
Back to top button